Toshiba Stratagy IVP8 - Manual (Page 36)

Installation
Step 11: Configure Stratagy IVP8
24
Stratagy IVP8 Installation Guide 01/02
CAUTION! Take care when making changes and then restarting Stratagy IVP8. In some
cases, if invalid information has been entered, Stratagy IVP8 may not reboot
correctly. (See
“Automatic System Recovery” on page 42 for information on files
created during an unsuccessful restart.)
SMDI Serial Integration
SMDI integration is required to provide the capability to recognize Calling Party Identification
(ANI) and for the KSU time feature. See Stratagy R3 I&M Manual for details.
Stratagy System Configuration
Use this function to change Stratagy IVP8’s system options and parameters, and define time-out
values. Most Stratagy System Configuration options do not require modification.
We recommend that you modify the system password immediately. All other options have default
values, but can be modified as required.
Configure Stratagy IVP8 Software
1. From the Tools menu, press 6. The system configuration file displays. The parameters are
listed in alphabetical order.
Note Fax settings are not available to the Stratagy IVP8.
2. Make changes to the parameters. See “System Configuration” in Chapter 3 – Configure
Stratagy of the Stratagy R3 I&M Manual for instructions on changing the parameters.
3. Press ESC.
4. From the Stratagy System Config screen, press 1. The changes are transmitted to
Stratagy IVP8 and Stratagy IVP8 is shut down and restarted. By shutting down and restarting
Stratagy IVP8, the changes take effect.
...or 2. The changes are transmitted to Stratagy IVP8 but Stratagy IVP8 is not shut down or
restarted. Until you restart Stratagy IVP8, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
5. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt displays. To
continue, you must re-enter Stratagy Admin.