Tripp Lite B050-000 - Manual (Page 44)

Chapter 5. Usage
Video Settings through the remote console
Figure 5-10. Video Settings Panel
Brightness
Controls the brightness of the picture.
Contrast
Controls the contrast of the picture.
Clock
Defines the horizontal frequency for a video line and depends on the video
mode. Different video card types may require different values here. The de-
fault settings in conjunction with the auto adjustment procedure should be
adequate for all common configurations. To achieve a better picture quality
you may try to change this setting together with the sampling phase.
Phase
Defines the phase for video sampling, used to control the display quality
together with the setting for sampling clock.
Horizontal Position
Use the left and right buttons to move the picture in horizontal direction
while this option is selected.
Vertical Position
Use the left and right buttons to move the picture in vertical direction while
this option is selected.
Reset this Mode
Reset mode specific settings to the factory-made defaults.
Reset all Modes
Reset all settings to the factory-made defaults.
Save changes
Save changes permanently.
36