Tripp Lite B050-000 - Manual (Page 57)

Chapter 6. Menu Options
Upload a Floppy Image
Within two small steps working on the basis of a certain (floppy) image can be
achieved.
• First the path of the image has to be specified. You can do that either by hand or
by using the file selection dialog of your web browser. To open the file selection
dialog click on the button “Browse” and select the desired image file.
Figure 6-5. Select Image File
The maximum image size is limited to 1.44MB. To use a larger image mount this
image via Windows Share (or SAMBA) (see the Section called Use Image on Windows
Share (SAMBA) for details).
• Secondly, click on the button “Upload” to initiate the transfer of the chosen image
file into the B050-000’s on-board memory. This image file is kept in the on-board
memory of the B050-000 until the end of the current session, until you logged out
or initiated a reboot of the B050-000.
Download a Floppy Image
A floppy image kept in the B050-000’s memory can be both read and written to. To
retrieve the changed image contents after writing to it click the “Download” button
and select a folder to store the file in.
Figure 6-6. Active Image File
49