Tripp Lite B050-000 - Manual (Page 68)

Chapter 6. Menu Options
MS Windows
You can use the tool “RawWrite for Windows”.
Figure 6-18. RawWrite for Windows selection dialog
Select the tab “Read” from the menu. Enter (or choose) the name of the file in which
you would like to save the floppy content. Click on the button “Copy” to initiate the
image creation process.
For related tools you may have a look at the homepage of the fdos project
(
http://www.fdos.org/ripcord/rawrite/ ).
CD ROM/ISO 9660 Images
UNIX and UNIX-like OS
To create an image file make use of “dd”. This is one of the original UNIX utilities
and is included in every UNIX-like OS (UNIX, Sun Solaris, Linux).
To create a CDROM image file copy the contents of the CDROM to a file. You can use
the following command:
dd [ if=/dev/cdrom ] [ of=/tmp/cdrom.image ]
dd reads the entire disc from the device /dev/cdrom and saves the output in the spec-
ified output file /tmp/cdrom.image . Adjust both parameters exactly to your needs
(input device etc.).
60