Tripp Lite B050-000 - Manual (Page 54)

Chapter 6. Menu Options
Remote Power
Figure 6-2. B050-000 Power Buttons
Intelligent Platform Management Interface (IPMI)
The B050-000 is capable of controlling the power status of an IPMI-enabled host sys-
tem. See the Section called Intelligent Platform Management Interface (IPMI) for config-
uration instructions.
If the B050-000 is configured to act as an IPMI client the Remote Power Control page
will show three buttons:
Power On
Sends an IPMI “Power On” command to the Baseboard Management Controller
(BMC).
Power Off
Sends an IPMI “Power Off” command to the BMC.
Reset
Sends an IPMI “Hard Reset” command to the BMC.
46