Tripp Lite B050-000 - Manual (Page 50)

Chapter 5. Usage
The status line displays the number of frame buffer updates (“Fps”) as well as the
incoming (“In:”) and the outgoing (“Out:”) network traffic in kilobyte per second. A
low value of the network traffic is recommended and can be achieved as described
in the Section called Optimizing the Video Picture. If compressed encoding is enabled,
a value in brackets displays the compressed transfer rate.
Figure 5-17. Status line transfer rate
The next button displays the Remote Console Access settings.
Table 5-3. Buttons displaying the access state
One single user is connected to the Remote Console of the
B050-000.
One or more users are connected to the Remote Console of the
B050-000.
Exclusive access is set for you. Any other user may not access the
remote host via Remote Console unless you disable this option.
A remote user has exclusive access. You may not access the
remote host via Remote Console unless the other user disables
this option.
The outer right button displays the state of the Monitor Only settings.
Table 5-4. Buttons displaying the Monitor Only state
The option Monitor Only is disabled.
The option Monitor Only is enabled.
For more information about Monitor Only and Exclusive Access settings see the ac-
cording paragraphs in the Section called Remote Console Control Bar.
Optimizing the Video Picture
To achieve an optimal video picture for the Remote Console you may follow the steps
as given here:
42