Replacing the fuser – Tally Genicom mL450 User Manual
Page 121
Advertising
May 04
Publication No. GEG-99197
TallyGenicom mL450 Laser Printer User Manual
5-13
Replacing the Fuser
11.
Close the duplex printing unit.
Replacing the Fuser
WARNING: The fuser becomes very hot during operation. Never touch the fuser area where
a label indicating high temperature is located (such as that shown below), or else burns
may result. Before replacing the fuser, turn the printer off and wait at least 40 minutes
before replacing it.
Advertising