Tally Genicom mL450 - Manual (Page 182)

Publication No. GEG-99197 May 04
7-10 TallyGenicom mL450 Laser Printer User Manual
Using the Hard Disk Option and User Flash DIMM Module
Format Flash
This selection will reformat the FLASH SIMM. All files on the FLASH SIMM will be deleted if
this function is selected.
Flash Summary
This selection will print a page containing information about the FLASH SIMM including a list of
all the current existing files and directories.
Using the PCL and PostScript Power-On Files Feature
Power-on Files Defined
If a FLASH SIMM or Hard Disk option is installed in your printer, your printer has the capability
of storing additional power-on files which can be read and interpreted at power-on.
Power-on files can contain either PCL or PostScript language content. Examples of power-on files
include soft fonts, and macro/overlay definitions. The FLASH SIMM can store approximately
8MB of file storage, the hard disk drive storage depends on the size of the drive that is installed in
your printer.
NOTE: Power-on files are processed at power-on initialization only and not at the start of every print
job.
Contact the technical support organization at your point of purchase for full details about the
power-on files feature.
Using the FLASH SIMM or Hard Disk Option as a PostScript Device
In order to allow PostScript programs to access the FLASH SIMM and/or hard disk options, a full
implementation of a PostScript storage device is provided. This section discusses an overview of the
PostScript operators and parameter sets that are included in the support.
For detailed information on using the operators/parameter sets, please refer to the following publi-
cations:
PostScript Language Reference Manual
Adobe PostScript 3 Version 3010 Product Supplement
Device Names and Priority
The device names assigned to the FLASH SIMM and hard disk options are as follows:
If both devices are installed, both devices can be referenced uniquely by name. If no device name is
specified in the PostScript operation, the SearchOrder parameter in the device parameter set estab-
lishes the priority for file operations. When both devices are installed, the SearchOrder value for the
hard disk is set to 1, while the SearchOrder value for the FLASH SIMM is set to 2. This gives prior-
ity to the hard disk.
%flash% device name for the FLASH SIMM
%disk0% device name for the hard disk