Using the rs-232c/rs-422 serial interface, Control panel menu structure – Tally Genicom mL450 User Manual
Page 211
May 04
Publication No. GEG-99197
TallyGenicom mL450 Laser Printer User Manual
7-39
Control Panel MENU structure
Using the RS-232C/RS-422 Serial Interface
This section lists the Serial Interface setup features and available selections via the control panel
menus. The Serial Interface connector pinouts are listed. Troubleshooting error messages appearing
on the printer’s control panel are also discussed.
Control Panel MENU structure
When the RS-232C/RS-422 serial interface is installed, the printer control panel menu structure is
enhanced as shown in the following table. The shaded areas denote additional features and settings
relevant to the RS-232C/RS-422 interface.
Menu
Paper Menu
Interface Menu
Port
Parallel
Serial
Parallel Setup
On
Serial Setup
Off
Interpreter
Auto Switch
PCL
Postscript 3
Format
Normal
Binary
Raw
Serial Mode
RS232
RS422
Baud Rate
1200
2400
4800
9600
19200
38400
57600
115200
Data Bits
7
8
Stop Bits
1
2
Parity