Tally Genicom mL450 - Manual (Page 96)

Publication No. GEG-99197 May 04
4-14 TallyGenicom mL450 Laser Printer User Manual
Interface Menu
Network Card 1 Setup
This submenu allows you to
set up the Network interface. Interpreter:
Auto Switch
Format:
Raw
Network
Address:
IP Address:
(user-specified)
Subnet Mask:
(user-specified)
Default Router:
(user-specified)
LPD Banner:
On
DHCP:
On
Delay Out
Close:
Off
Host Name:
Character string
0-31 characters
mDNS:
On
Local Link:
0.0.0.0
mDNS Host
Name:
Product name
and last 3 hex
byte values of
Network Address
mDNS Svc
Name:
Product name
and last 3 hex
byte values of
Network Address
Mulit-Session:
On
AppleTalk:
Binary PS:
Off
Interpreter:
Auto Switch
PCL
PostScript 3
Format:
Raw
Normal
Binary
Network Address:
IP Address:
(user-specified)
Subnet Mask:
(user-specified)
Default Router:
(user-specified)
LPD Banner:
On
Off
DHCP:
Off
On
Delay Out Close:
Off
On
Host Name:
mDNS:
On
Off
Local Link:
mDNS Host
Name:
mDNS Svc Name:
Mulit-Session:
On
Off
AppleTalk:
Binary PS:
Off
On
1. Press NEXT or PREVIOUS to move among the
submenus.
2. Press SELECT to choose a submenu.
3. Press NEXT or PREVIOUS to scroll through the
settings.
4. Press SELECT to save this setting.
Submenus Default
Setting Available
Settings Procedure for Changing Setting