Tally Genicom mL450 - Manual (Page 94)

Publication No. GEG-99197 May 04
4-12 TallyGenicom mL450 Laser Printer User Manual
Interface Menu
Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following procedure
to enter the interface menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Interface Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the interface menu.
4. Press the NEXT button to move through the submenus: Port, Parallel Setup, and Net-
work Setup.
5. Use the procedures in the following table to access and change the printer interface settings:
Submenus Default
Setting Available
Settings Procedure for Changing Setting
Port
This submenu allows you
to enable the type of
interface. Parallel:
On
Network Card
1:
On
Parallel:
On, Off
Network Card 1:
On, Off
1. Press NEXT or PREVIOUS to toggle between
PARALLEL, NETWORK CARD 1.
2. Press SELECT to save this setting.