Tally Genicom mL450 - Manual (Page 146)

Publication No. GEG-99197 May 04
6-4 TallyGenicom mL450 Laser Printer User Manual
Solving Print Quality Problems
Character voids Print media is outside
recommended specifications Use recommended print media. See
”Chapter 5 Printer Consumables, Cleaning
and Maintenance”
.
EP cartridge is old or
damaged. Replace EP cartridge. See ”Chapter 5
Printer Consumables, Cleaning and
Maintenance”
.
Toner smears when rubbed Print media is moist Remove moist media and load new dry
media. See See
”Chapter 5 Printer
Consumables, Cleaning and Maintenance” .
Print media is outside
recommended specifications Use recommended print media. See
”Chapter 5 Printer Consumables, Cleaning
and Maintenance”
.
Black page EP cartridge is old or
damaged. Replace EP cartridge. See ”Chapter 5
Printer Consumables, Cleaning and
Maintenance”
.
High-voltage power supply
may be defective Call to arrange for a technical support or
service or repair call.
Blank page Sealing tape of EP cartridge
not pulled out. Pull out sealing tape. See ”Chapter 5 Printer
Consumables, Cleaning and Maintenance” .
Printer feeds two or more
sheets at a time Avoice adding paper to a nearly full stack.
See
”Chapter 5 Printer Consumables,
Cleaning and Maintenance” .
EP cartridge is old or
damaged. Replace EP cartridge. See ”Chapter 5
Printer Consumables, Cleaning and
Maintenance”
.
Toner in EP cartridge is low.
High-voltage power supply
may be defective Call to arrange for a technical support or
service or repair call.
DESCRIPTION POSSIBLE
CAUSE
REQUIRED
ACTION