Tally Genicom mL450 - Manual (Page 89)

May 04 Publication No. GEG-99197
TallyGenicom mL450 Laser Printer User Manual 4-7
Pushbuttons
NOTE: Additional menus and submenus may appear in the printer menu system when other options are
installed.
Job Library
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text “Job Library Menu” is shown on the second line of the
display.
3. Press the SELECT button to enter the Job Library menu.
4. Press the NEXT button to move through the submenus: Print or Delete.
5. Press the SELECT button to enter a submenu.
Use the procedures in the following table to access and change the system settings.
Submenu Default
Setting Available Settings Procedure for Changing Setting
Print Print
User Folder 1 1. Press NEXT or PREVIOUS to scroll
through the User Folder Names.
2. Press SELECT to choose the desired
User Folder.
Print Print
Job1 1. Press NEXT or PREVIOUS to scroll
through the Print Job Names.
2. Press SELECT to choose the desired
Print Job.
Job Name
PIN This step is necessary if
the job is a PRIVATE job. 1. Press NEXT or PREVIOUS to increase
or decrease each digit of the
four-digit number.
2. Press SELECT to set one digit and
move to the next digit.
3. Press SELECT after changing the last
digit to save this setting.
Print Job Name
Copies - Select
1-99 1. Press NEXT or PREVIOUS to increase
or decrease each digit of the two-digit
number.
2. Press SELECT set one digit and
move to the next digit.
3. Press SELECT after changing the last
digit to save this setting.
Print Job Name
Copies 1. Press SELECT to print the job.
Print Printing
Playback 1. The printer will display PRINTING on
Line 1 and PLAYBACK on Line 2 of the
display while printing the job.
Delete Delete
(To delete a
saved job) 1. Press NEXT or PREVIOUS to scroll
through Print or Delete options.
2. Press SELECT to choose Delete.