Tally Genicom mL450 - Manual (Page 194)

Publication No. GEG-99197 May 04
7-22 TallyGenicom mL450 Laser Printer User Manual
Using the Hard Disk Option and User Flash DIMM Module
Job Name
INCORRECT PIN 1. If an incorrect PIN is entered, press PREVIOUS to
re-enter the correct PIN.
Job Name
Copies - Select 1-99 1. Press NEXT or PREVIOUS to increase or decrease
each digit of the two-digit number.
2. Press SELECT to set one digit and move to the
next digit.
3. Press SELECT after changing the last digit to save
this setting.
Job Name
Copies 1. Press SELECT to print the job.
Printing
Playback The printer will display PRINTING on Line 1 and
PLAYBACK on Line 2 of the display while printing the
job.
Job Library
DELETE Delete
(To delete a saved job) 1. Press NEXT or PREVIOUS to scroll through Print or
Delete options.
2. Press SELECT to choose Delete.
Delete
User Folder 1 1. Press NEXT or PREVIOUS to scroll through the
User Folder Names.
2. Press SELECT to choose the desired User Folder.
Delete
Job1 1. Press NEXT or PREVIOUS to scroll through the
Print Job Names.
2. Press SELECT to choose the desired Print Job to
Delete.
Job Library
(Delete Saved
Job with PIN) Delete
(To delete a saved job with a PIN) 1. Press NEXT or PREVIOUS to scroll through Print or
Delete options.
2. Press SELECT to choose Delete.
Delete
User Folder 1 1. Press NEXT or PREVIOUS to scroll through the
User Folder Names.
2. Press SELECT to choose the desired User Folder.
Delete
Job1 1. Press NEXT or PREVIOUS to scroll through the
Print Job Names.
2. Press SELECT to choose the desired Print Job to
Delete.
Job Name
PIN 1. Press NEXT or PREVIOUS to increase or decrease
each digit of the four-digit number.
2. Press SELECT to set one digit and move to the
next digit.
3. Press SELECT after changing the last digit to save
this setting.
Job Name
INCORRECT PIN 1. If an incorrect PIN is entered, press PREVIOUS to
re-enter the correct PIN.
Job Name 1. Press SELECT to Delete the job.
Menu Submenus Procedure for Changing Setting