Teac GF-550 - Manual (Page 19)

19
ENGLISH
To add a track to the end of the program
In the stop mode, press the PROGRAM button.
Select a track number by pressing the
. or / button, and
then press the PROGRAM button.
The track is added to the end of the program.
To delete the last track from the program
In the stop mode, press the CLEAR button to delete the last
track from the program.
To clear the program
In the stop mode, press and hold the STOP button ( H) for more
than 2 seconds to clear the program.
If one of the following buttons is pressed, the programmed
contents will be cleared:
Main unit
OPEN/CLOSE, POWER, FM/AM, PHONO/TAPE/AUX, STOP in the
stop mode
Remote control
FM/AM, PHONO/AUX, STOP in the stop mode
Each time the REPEAT button is pressed, the repeat mode is changed
as follows:
REPEAT ALL REPEAT 1
(Normal playback)
REPEAT ALL (Repeat All the Tracks)
Press the REPEAT button once during playback.
All the tracks of the disc will be played repeatedly.
REPEAT 1 (Repeat one track)
Press the REPEAT button twice during playback.
The track being played will be played repeatedly. If you press the
or button and select another track, the track you selected will be
played repeatedly.
It is also possible to select a track to be repeated in the stop
mode. Press the REPEAT button twice and then select the track
number by pressing the or button. Press the PLAY/PAUSE
button (/) to start playback.
If one of the following buttons is pressed, repeat mode will be
cancelled:
Main unit
OPEN/CLOSE, POWER, FM/AM, PHONO/TAPE/AUX
Remote control
FM/AM, PHONO/AUX
Repeat playback works with finalized discs only.
Shuffle playback does not work during REPEAT 1 (repeat one
track) mode.
Repeat Playback