Toshiba Strata CT DKT2510-FSD - Manual (Page 125)

Strata CT Digital Telephone User Guide November 2001
109
The Single Digital Telephone Grand Tour LED Indicators
LED Indicators
The
Line
button has an LED that flashes at varying rates to indicate line or call status (see Table 12 ).
The
Msg
button’s LED indicates a message is waiting.
Table 11 Fixed Button Definitions
Button Definitions
Line
Used to answer and place calls. This button is your [PDN]. It is not an Exchange line
button. Also used to program Voice Mail ID codes and Call Forwarding.
Cnf/Trn
Used for conference and transfer calls (see “Call Park Orbits” on Page 126 and
“Conference Calls” on Page 129 ).
Hold
Used to hold internal or outside calls. Also used for Exclusive hold. See “Hold” on
Page 135 .
Msg
The message button is used to call back the station or voice mail device that
activated the LED (see
“Message Waiting” on Page 136 ).
Vol ▲
Vol ▼
Adjusts volume levels ( “Volume Controls” on Page 11 ).
Table 12 LED Indicators
Use
Your Station Other Station
Interval Rates
Line In Use (access outside line)
2 seconds on, 1/8 second off—
1/8 second ON/OFF
steady
Incoming Call (while ringing) 1 second on at 10 pulses/second—1 second OFF one second ON/OFF
Hold (outside line) 4 pulses/second for 1/8 second ON/OFF
1/2 second
ON/OFF
Hold – Consultation (during consultation/
transfer to another station)
10 pulses/second steady
Hold – Exclusive (outside line) 10 pulses/second steady
Hold – Recall (when held call recalls your
idle station) 1 second at 2 pulses/second, 1 second at 10
pulses/second
flashes
Hold – Exclusive Recall 1 second at 2 pulses/second, 1 second at 10
pulses/second
steady