Toshiba Strata CT DKT2510-FSD - Manual (Page 26)

10
Strata CT Digital Telephone User Guide November 2001
LED Indicators The Digital Telephone Grand Tour
LED Indicators
Each line and feature button has a LED next to it which indicates the status of the line or feature
associated with the button.
Line LEDs light red or green and flash at varying rates to indicate call status (see Table 3 ).
Table 3 LED Indicators
Use
Your Station (Green) Other Station (Red)
Interval Rates
Line or [DN] In-Use
(access outside line) 2 seconds on, 1/8 second off
— 1/8 second ON/OFF
steady
Incoming Call
(while ringing) 1 second on at 10 pulses/second
—1 second OFF
one second ON/OFF
Hold (outside line)
If using
Pooled Line Grp
, the hold
indication is only at the station that
places the call on hold.
4 pulses/second for 1/8 second
ON/OFF
1/2 second ON/OFF
Hold – Consultation
(during consultation/transfer to another
station)
10 pulses/second steady
Hold – Exclusive (outside line) 10 pulses/second steady
Hold – Recall
(when held call recalls your idle
station)
1 second at 2 pulses/second,
1 second at 10 pulses/second
flashes
Hold – Exclusive Recall
1 second at 2 pulses/second, 1
second at 10 pulses/second
steady
Internal Call
(while station ringing) Your [PDN] flashes 10 pulses/
second—1 second off [SDN] red flashing or
green ringing
Busy Station Transfer
(outside call transferred to your busy
station from a designated station or
AA)
4 pulses/second, 1/8 second ON/
OFF 3/4 second on, 1/8
second OFF
After disconnecting first call... 10 pulses/second 2 pulses/second
Alert Signal .5 seconds 4 seconds
Conference 10 pulses/second steady