Message waiting light on [phdn/mw, Message waiting light on another telephone – Toshiba Strata CT DKT2510-FSD User Manual

Page 69

Advertising
background image

Strata CT Digital Telephone User Guide November 2001

53

Features

Message Waiting

Message Waiting Light on [PhDN/MW]

To respond to [PhDN/MW]

To cancel [PhDN/MW]

Message Waiting Light on Another Telephone

To set a message waiting light on another telephone

1. Press the flashing red [PhDN/

MW] LED.

Your phone rings the station or voice mail device that left
the message. If the called party or VM device answers, the
message waiting indication is cancelled automatically. If
there is no answer, hang up and try at a later time. The red
[PhDN/MW] LED on your phone continues to flash.

2. After receiving the message,

press

Spkr

...or place the handset on-hook.

If you have more messages, the red [PhDN/MW] LED
continues to flash. To answer the next message, repeat this
procedure.

1. Press [PhDN].

You hear a steady dial tone.

2. Enter

#409

.

The dial tone stops.

3. Press

Spkr

.

The [PhDN/MW] LED turns OFF, indicating that the
message has been cancelled.

1. Press [DN] and dial an internal

number.

You hear ringback or busy tone.

2. Press

Msg

or

7

.

The Msg or PhDN/MW] LED
flashes red at the called
telephone. The Msg LED lights
steady red at your telephone.
The LCD displays the station
[203] where you set a message
waiting light.

NO. 201

INT 203 MW SET

Advertising
This manual is related to the following products: