Toshiba Strata CT DKT2510-FSD - Manual (Page 168)

152
Strata CT Digital Telephone User Guide November 2001
Features Add-on Module/DSS Console
➤
To transfer call to a busy station
Call Answering (Exchange Line)
If your DADM or DSS console is equipped with a
Line
button, you can answer Exchange line calls
from the DADM or DSS console as you would from a digital telephone. See Chapter 2 – Features for
detailed information.
➤ To answer an incoming Exchange Line call to a DADM or DSS Console
➤ Press the flashing
Line
.
Speed Dial
Your DADM or DSS console may be equipped with
SD
(Speed Dial) buttons that can be programmed
to dial telephone numbers or to access features.
SD
buttons on either the DADM or DSS console
function like
SD
buttons on digital telephones. See Chapter 2 – Features for information.
1. Press [DSS] corresponding to
the busy station to be called.
You may hear a busy tone. The original caller is placed
automatically on hold. The Line or [DN] LED flashes green at
double the on-hold rate, and the [DSS] LED remains steady
red.
2. Hang up. The call rings the called station once with the camp-on tone.
While the called station is receiving this tone, the Line LED
flashes green (on-hold rate) or if you are on a [DN] button, it
goes idle. The [DSS] LED remains steady red.
When the called station answers the transferred call, the Line
LED becomes steady red. The [DSS] LED remains steady red.
Note If the busy station is in the DND mode, the call will
not transfer, but will recall your telephone
immediately.
If the call is not answered after a specified Recall time set in
system programming, camp-on is cancelled and the
transferred call rings back.