Message waiting light on [pdn – Toshiba Strata CT DKT2510-FSD User Manual

Page 68

Advertising
background image

52

Strata CT Digital Telephone User Guide November 2001

Message Waiting

Features

Message Waiting Light on [PDN]

To answer a Msg light

To cancel the Msg light

1. Press

Msg

, then lift the

handset.

If you reach a station that is
busy or does not answer, go
on-hook and press

Msg

again.

The system rotates to the next
message sender.

Your phone rings the station or voice mail device that
set the indication. The LED continues to flash red.

The LCD can show up to three
stations that have left messages
for the [PDN] and three for
each of your [PhDNs].

2. Press

Scroll

to display them.

In the example (shown at
right), the display indicates
that station DN [

203

] received

a message signal from DN [

201

].

The “+” indicates additional messages.

3. After receiving the message(s),

place the handset on hook.

If the Msg LED continues to flash, you have more
messages–repeat the Steps to retrieve them. Voice mail
devices may cancel the indication after a short delay.

Press

Msg

and lift the handset.

Your Msg LED turns OFF when the called party
answers.

Note

The called party must answer–by either going
off-hook or by pressing

Spkr

–for the

indication to be cancelled automatically.

Your Msg LED turns OFF without calling the
telephone or VM device.

...or [DN] +

#409

to cancel

the light. This must be done for
each message recorded.

NO. 204

CALL 203-201+

Advertising
This manual is related to the following products: