Call park orbits – Toshiba Strata CT DKT2510-FSD User Manual
Page 50
34
Strata CT Digital Telephone User Guide November 2001
Call Park Orbits
Features
Call Park Orbits
The Call Park feature enables you to hold a call temporarily in an orbit (the area where the call is
held). Anyone can retrieve the call from the orbit using the same or a different station. There are 20
General Park Orbits for the system and 1 Personal Park Orbit for each station.
Once you have parked a call in an orbit, you can:
♦
Hang up and retrieve the parked call at a later time
♦
Originate another call
♦
Access a voice paging device to announce the parked call for pickup from another station
If you park a call and it is not retrieved the following occurs:
♦
If your station is idle when the system Call Park recall timer expires, the parked call automatically
recalls to your station.
♦
If your station is busy, the parked call camps-on.
If you have an LCD telephone, you can let the system automatically select an available orbit number
which displays on your LCD. To monitor the calls parked at your station, see
.
➤
To park a call
1. While on a call, press
Park in Orbit
...or
Cnf/Trn
+
#332
.
The LED flashes green
(consultation-hold).
2. Enter a General Orbit
Number (
900
~
919
)
or a valid [PDN]
The call is parked and the
Exchange line flashes (Hold), or
the [DN] LED turns OFF.
...or if you have an
LCD, press
999
.
The system parks the call on the lowest vacant Orbit
Number.
3. Hang up.
The caller’s extension or Line
number and the orbit number are
shown.
ENTER ORBIT NO
RTRN
6793 PK ORBIT 900