Toshiba Strata CT DKT2510-FSD - Manual (Page 55)

Strata CT Digital Telephone User Guide November 2001
39
Features Call Transfer with Camp-on
➤
To transfer a call
1. While on a call, press
Cnf/Trn
.
The Line or [DN] LED flashes green (conference rate).
You hear internal dial tone.
2. Dial the [DN] where
the call will be
transferred.
The Exchange line rings the called station. If you hear
a single tone, you can then announce the call over the
called telephone’s speaker. (If you hear ringing tone,
the call was made with Tone Signalling.)
3. If the station is idle,
announce the call and
hang up
...or if the station is
busy or does not
answer, hang up The Line LED flashes green (on-hold). If you
transferred the call from a [DN], the [DN]’s LED turns
off. The Exchange line or [DN] camps on to the called
station and the called station receives a warning tone.
The camped-on call rings when you hang up.
...or to reconnect to
the transferred line
before it is answered,
press the flashing
Line
or [DN] +
#42
.
The Line LED is a steady red
when the called station
answers the transferred call.
If the call is not answered
after a specified Recall time
set in system programming,
camp-on is cancelled and the
transferred call rings back
(when your station or [DN] is
idle or sends two tone bursts
if your telephone is busy).
The LCD shows the
Exchange line number and the
station number [203] where it
was originally transferred.
NO. 204
CAMP-ON 4
HOLD LINE 2
LN
2 RECALL 203