Toshiba Strata CT DKT2510-FSD - Manual (Page 167)

Strata CT Digital Telephone User Guide November 2001
151
Add-on Module/DSS Console Features
Transfer to an Idle Station
You can transfer internal or outside calls to an idle station from either a DSS console or a DADM.
➤
To transfer a call to an idle station
Call Transfer with Camp-on
You can transfer a call to a busy station from either a DSS console or an DADM. Use the [DSS] to
transfer the call, even though the [DSS] LED associated with the station you are “transferring to” is
red.
1. Press [DSS] corresponding to
the station to be called.
The call is placed automatically on hold. The Line or [DN]
LED flashes green at double the on-hold rate, and the [DSS]
LED flashes green.
You hear a single-ring tone. (If using the Tone signalling
mode, you hear successive ring tones.)
2. Announce the call. With Tone signalling, you would have to wait for the called
station to answer before announcing the call.
3. Hang up. The call rings the called station when you hang up. While the
called station is ringing, the [DSS] LED is steady red, and the
Line LED flashes green at the on-hold rate or if on a [DN]
button, it goes idle.
When the called station answers the call, the [DSS] LED stays
steady red, and the Line LED becomes steady red.
4. If the station does not answer
before a period set in system
programming, the call recalls
your station.