Toshiba Strata CT DKT2510-FSD - Manual (Page 85)

Strata CT Digital Telephone User Guide November 2001
69
Features Speed Dial–Advanced Features
Speed Dial Pause and Flash/Recall Storage
Some Speed Dial numbers may require a pause (long or regular) or hookflash be included (e.g., tone
delay requires a pause at the beginning of a Speed Dial number).
Speed Dial Number Linking
You can link any of the Station Speed Dial numbers to System Speed Dial codes or to any of the
optional buttons associated with these codes. This enables up to 36 digits to be stored under one
Station Speed Dial button or code.
The number directly stored in the System Speed Dial number dials out first, then the number linked to
it. Typically, a company’s special carrier access telephone numbers are stored as part of the digit
string.
Note A designated station can be used to link System Speed Dial codes. See the System
Administrator’s User Guide.
Important! Before linking Speed Dial Numbers, make sure the System Administrator has stored the
desired number in the System Speed Dial you plan on using.
Hookflash Regular Pause Long Pause
The
Flash/Recall
button stores a
flash signal only if
Spd Dial Pause
is programmed as a flexible button on
the telephone. The flash signal is 0.5
or 2 seconds long (set in system
programming) and is displayed on the
LCD as “F-”.
Press
Flash/Recall
...or enter the hookflash/recall dial
code (
Cnf/Trn
+
#45
).
The pause is either 1.5 or 3 seconds (set
in system programming). The LCD
displays “P-”.
Press
Spd Dial Pause
...or if
Spd Dial Pause
is not on the
telephone, press
Flash/Recall
to store
a pause.
Ten-second pause, which can be
entered anywhere in the Speed
Dial number. The LCD displays
“L-”.
Press
Spd Dial Lng Pause
.