Toshiba MA-516-100 - Manual (Page 110)

- 106 -
EO1-11116
MA-516-100 SERIES
Periodical Read Reports:
Periodical Financial Read (X) Report
Use MGR or MA Key.
Zone PLU Sales Reset (Z) Report
Use MA Key.
2 OFF Z
REG
X
SET
MGR
-
→ →
“20” is fixed for
Periodical Financial
Read.
See page 108 for
sample format.
0 AT/TL
Department Sales Data & Financial Sales
Data for the period
Report
Print
Starts
→
→
OFF Z
REG
X
SET
MGR
-
→
@/FOR PLU
The drawer does not open.
Sales data of the PLUs of the codes in
the range of the designated zone.
(PLUs with zero sales data are skipped.)
PLU Code that starts the
required zone (range) for
this report (max. 3 digits).
PLU Code that
ends the zone
(max. 3 digits).
The Start PLU Code must be equal to or smaller
than the End PLU Code. When equal, the data
of only one PLU is read.
Report
Print
Starts
See page 115 for
sample format.
→
NOTE: If this reset report is necessary, it must be taken
before the “All PLU Reset Report” (i.e., all the PLUs
sales data are reset by All PLU Reset).
The drawer opens
&
4
“4” is fixed for Peri-
odical All Cashier
Read.
AT/TL
Periodical All Cashier Read (X) Report
(regardless of any Cashier Identifying method; Signed-OFF condition is required for
Signing Method)
Use MGR or MA Key.
REG
X MGR
-
The drawer opens
&
OFF Z
SET
→ →
Sales data recorded for Periodical All Cashier Read.
(Cashiers with zero sales data are not printed but their cashier codes.)
Report
Print
Starts
See page 113 for
sample format.
→
If an error occurs:
· Is the register signed-
OFF?