Toshiba MA-516-100 - Manual (Page 61)

- 57 -
EO1-11116
MA-516-100 SERIES
Preset-price PLU of SPP Type
NOTES 1. The product obtained by Quantity Extension cannot be repeated.
2. The decimal portion of the Quantity entry is processed down to the 2 digits below the decimal
point. The fraction rounding at this time is fixed to ROUND OFF.
3. You can select the rounding process of the fractions of the product (result of multiplication)
-- ROUND OFF (initial setting), ROUND UP, or ROUND DOWN. (Refer to Chapter “22.
System Option Setting” Address 2 - Bits 1 and 2 on page 120.)
Receipt Print Format for PLU Quantity Extension
PLU
→
PLU Code
Quantity
Unit Price
Product
PLU SPP (Split-Package-Pricing):
This operation is used when a customer purchases only part but not all of the items in a PLU package (example;
only two tomatoes in a priced package of three tomatoes).
(Also, refer to “Department SPP” on page 49 already
described.)
Open-price PLU of SPP Type
If an error occurs here:
Possible cause of error:
•
Product exceeding 7 digits.
→ Check the Purchased Q’ty.
• The Purchased Q’ty contains decimal portion.
→ Check the Purchased Q’ty.
• The PLU is not a SPP-type PLU.
→ Check the PLU Code.
→
AMT
.....
(Q’ty = Quantity)
Purchased Q’ty
max. 3 digits
(integer only)
→
PLU Code max.
3 digits; 1 to 999
@/FOR
Whole Package
Price max. 6
digits
PLU
PLU Code max.
3 digits; 1 to 999 (The preset price is
regarded as the Whole
Package Price.)