No-sale – Toshiba MA-516-100 User Manual
Page 90
- 86 -
EO1-11116
MA-516-100 SERIES
(Non-add Number Print/No-sale Key)
The No-sale transaction is used to open the drawer without relating to a sale, for such purposes of giving changes
(to break a large-amount bill), checking the receipt/journal print condition, date or time accuracy, etc. This operation
must be performed outside a sale only.
Operable outside a sale only
OFF
Z
REG
X
SET
MGR
-
→
#/NS
→
(
or
)
NS
No-sale Transaction Symbol
NOTES
1. The drawer opens, and a No-sale receipt is issued.
2. Usually, Non-add Number entries are prohibited at the starting of a No-sale transaction (i.e., Non-
add Numbers cannot be printed on a No-sale receipt) However, a No-sale entry can be
programmed to be allowable after a Non-add Number entry (refer to Chapter “22. System
Option Setting”, Address 15 -Bit 1 on page 133.)
3. The [#/NS] key operates and functions the same in this case. When this key is depressed with
a prior number entry, it functions as the Non-add Number Print key. (Refer to the section of Non-
add Number Print on page 72.)