Toshiba MA-516-100 - Manual (Page 93)

- 89 -
EO1-11116
MA-516-100 SERIES
Setting Foreign Currency Exchange Rate:
Set the exchange rate of the currency. Change the rate daily, if necessary.
Condition: Any time outside a sale. Must be signed off in the Cashier Signing
Method.
Programming Procedure:
Use the MA Key to turn the
Control Lock to the “SET” position.
OFF Z
REG
X
SET
MGR
-
→
NOTE 1, 2
.
Exchange Rate; max. 10 digits, 0.000001 to 9999.999999
.
→
.
→
.
→
NOTES 1. Obtain the rate by calculating in the subsidiary currency unit values for both the domestic and
the foreign currency. (In case of calculating the rate from the domestic to a foreign currency
with the same zero-suppress form, such as from U.S. $ to French Franc, it will be no problem.
However, in case of exchanging from a domestic currency such as U.S. $ to a foreign
currency such as Japanese yen, this rule must be obeyed; otherwise a wrong rate will result.)
2. Calculate the required foreign currency value equivalent to the domestic currency value
“1”. Then the obtained value is the Exchange Rate value to be entered in the setting operation
above.
Example) Domestic Currency is US$:
1¢ = XXXX . XXXXXX centimes (French Franc)
= XXXX . XXXXXX pfennigs (Deutsche Mark)
= XXXX . XXXXXX yen (Japanese Yen)
etc.
Enter this value as the foreign currency exchange rate.
3. If “0” is set as the exchange rate, that key cannot be used in sale entries.
CUR1
CUR2
CUR3
CUR4