Toshiba MA-516-100 - Manual (Page 160)

- 156 -
EO1-11116
MA-516-100 SERIES
Sales Memory Clear
The operation defined as “Sales Memory Clear” will only clear the sales data accumulated in the register’s memory
(report memory). The programmed data will not be cleared. By operating a Sales Memory Clear, all the sales data
including non-resettable totals and counters, Reset Report Counts, Receipt Consecutive No. are cleared.
Warning: This clear operation deletes all sales data stored in the register’s memory.
Operating Procedure
Condition: Any time, outside or during any operation sequence except during
Key Setting or Key Location Changing (Chapter 15) or System
Option Setting (Chapter 22).
Operation:
Use the S Key to turn the
Control Lock to “BLIND”.
Depress the following Numeric Key according to the display and print format for zero amount:
for use in US or Canada
OFF Z
REG
X
SET
MGR
-
(BLIND)
→
→
Numeric Key Zero-amount Format
3 0 . 0 0
1 . 0
AT/TL
NOTE: When a Sales Memory Clear is operated, the condition “after all sales data reset” is obtained, just as
“Status Clear” or “All Memory Clear”. Therefore, no Reset Reports need to be taken for starting any
programming operation.
Depress the key.
A Sales Memory Clear receipt is issued.
Sales Memory Clear Symbol Line
(03 for Numeric 3, or 01 for Numeric 1)
Receipt Consecutive No. is reset to
0001.
Zero-amount Display & Print Format designated here.