Tripp Lite SNMP Solo MT-SE-37/02 - Manual (Page 20)

SNMP Solo
14 Configuration
Class B Network
0 255.255.000.000 8 255.255.255.000
1 255.255.128.000 9 255.255.255.128
2 255.255.192.000 10 255.255.255.192
3 255.255.224.000 11 255.255.255.224
4 255.255.240.000 12 255.255.255.240
5 255.255.248.000 13 255.255.255.248
6 255.255.252.000 14 255.255.255.252
7 255.255.254.000 15 255.255.255.254
Class C Network
0 255.255.255.0 4 255.255.255.240
1 255.255.255.128 5 255.255.255.248
2 255.255.255.192 6 255.255.255.252
3 255.255.255.224 7 255.255.255.254
The Gateway IP Address and MASK_BIT_COUNT are optional;
SNMP adapter generates the Network IP address.
To assign the system contact name, type 2 and enter the name
of the person to contact about the SNMP adapter:
To assign the UPS name, type 3 and enter name of the UPS:
To assign the UPS location, type 4 and enter the location name: