Tripp Lite SNMP Solo MT-SE-37/02 - Manual (Page 26)

SNMP Solo
20 Configuration
• Location (location of your UPS and SNMP Solo)
• List of the current communities with their access control
code
• List of the current trap receivers with their severity level
codes
Reset Configuration to Default
If you press <6>, the program resets all fields to default. To
display the results, press <5> for Display Settings. Most fields
have no values.
Figure 11 Reset Values To Default
To Save and Exit
If you are satisfied with your configurations, save them and exit.
To save, press <7>. The screen displays the following
message:
Figure 12 Save and Exit Messages For Configuration