Tripp Lite SNMP Solo MT-SE-37/02 - Manual (Page 31)

Tripp Lite
Configuring the NMS 25
Configuring the NMS
To complete the SNMP Solo installation and configuration
process, you must compile the necessary MIBs to configure the
NMS.
Any NMS with a MIB compiler can manage the SNMP Solo
adapter. For instructions on how to compile MIBs for the most
popular NMSs—Novell’s NetWare Management Station,
Hewlett-Packard’s OpenView Network Node Manager, and
SunConnect’s SunNet Manager; see the corresponding heading
below.
General Network Management
Stations
Follow these general procedures to configure an NMS:
• Compile the device MIBs.
• Add SNMP Solo object to the Management Map.
• Ping the SNMP Solo.
HP OpenView Network Node Manager for HP-
UX
Compile the Device MIB
8. Copy the UPS MIB file from the TAR formatted diskette
into the subdirectory /usr/OV/snmp_mibs.
9. From the main menu, select Options
10. Load/Unload MIBs: SNMP...
11. Select Load.
12. Select the MIB file copied earlier.
13. Select OK.
Add SNMP Solo Object to the Management Map
1. Select the submap then Edit: Add Object.
2. Select the group computer.
3. With the middle (or opposite) mouse button, drag the
generic symbol subclass device to the submap.