Tripp Lite SNMP Solo MT-SE-37/02 - Manual (Page 35)

Tripp Lite
Configuring the NMS 29
Poll the Device OIDs
1. Select the device glyph with the right mouse button.
2. Select Quick Dum, *-MIB then one of the MIB groups.
A window appears displaying a snapshot of the group.
Set the device OIDs
1. Select the device glyph with the right mouse button.
2. Select Set Request, *-MIB, {OID name}.
3. When the Set Tool application displays,
a) Click on Get to receive the current values.
b) Select a new value by clicking on New Value
then by clicking Set.
c) Click on Get again to view the changes.
Ping the SNMP Solo
1. Change active Window to Shell.
2. Type ping <IP address> and press <enter>.