Thermador CJ302 - Manual (Page 10)

CJ Oven Care and Use Manual
Sights & Sounds
Interpreting the Control Panel
The directions in the Care and Use Manual for setting the oven and its various modes are based on the
assumption that the panel displays and sounds will “lead” or help you set the controls easily. To aid in this path,
the following descriptions provide a basis for interpreting what is seen and heard.
Flashing Symbols or Numbers
Signals an incomplete setting; calls for another step or
START to be touched.
I Beep
Signals the receipt of an entry.
2 Beeps
Signal an error in entry.
4 Chimes
Signal the end of a setting.
Probe Symbol
Displays the internal temperature of the meat rather
than the oven roasting temperature. Oven tempera-
ture can be seen briefly by touching the cook mode
after touching START.
Lock Symbol
Displays during the Microwave, CookSmart, and Self-
Clean modes and when the door is locked. Do not
attempt to open door when lock symbol is displayed.
Door can be opened when symbol no longer appears.
PAU
Displays when a microwave program is paused or
interrupted and door unlocks.
Err
Displays if an invalid temperature or time is entered.
Power Failure
After the power returns to the oven, the clock displays
the time when the power was lost or turned off.
UPPER
LOWER
Selects the active oven to be set by highlighting the oven
in the mode display window. To use the upper oven, it is
not necessary to touch this pad before selecting the
cooking mode. If the lower oven is in operation, press
the UPPER/LOWER pad to use the upper oven.
Default Settings
The cooking modes automatically select a suitable
temperature. These can be changed when a different
one is needed. CookSmart settings cannot be changed.
Use Custom Combination Mode if a specific combination
setting is preferred (See Page 31).
START
Touch to complete an entry and before entering an
additional one.
UPPER OFF and LOWER OFF
Touch to cancel a mode that has already been started
or completed.
COOK TIME
Sets the number of hours and minutes the oven will be
“on.” Unlike Timer 1 or 2, the oven turns “off” auto-
matically when the time elapses. This pad is used with
the automatic timed oven control.
F Number Codes
These codes are displayed when there is a problem with
the signal sent to the electronic control board. See Solv-
ing Operational Problems, Page 64.
Convection Fan
The convection fans in both ovens operate during any
convection mode. When the oven is operating in the
convection mode, the fan will turn off automatically
when the door is opened.
An advanced, powerful, high-performance JetDirect con-
vection system is located in the upper oven. This revo-
lutionary impingement convection system moves the
heated air at an extremely high velocity and results in
foods that are cooked in a much shorter time than stan-
dard convection ovens.
This process results in a higher noise level than stan-
dard convection ovens. This is normal.
Component Cooling Fan
Activates during any cooking or self-cleaning mode to
cool inner components and outer door surfaces. This
air is exhausted through the vent located below the
lower oven. It continues to run until components have
cooled sufficiently.
Oven Features
Page 8