Toshiba E-STUDIO 850 - Manual (Page 122)

120 5.USING THE EDITING FUNCTIONS
5
2. EDGE ERASE
If the original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case, set
the edge erase. A white border is created along the edges of the copy, eliminating those black stains.
•
This function is available only in the case of standard-size originals.
1 Place paper in the drawer(s).
• When using this mode in bypass copying ( P.63), be sure to specify the paper size.
2 Place the original(s).
3 Press the [EDIT] button to enter the edit menu, and then press the
[EDGE ERASE] button.
4 Adjust the width by pressing the [2 mm] or [50 mm] button, and then
press the [ENTER] button.
• The default width of the white border is 5 mm (0.197").
• Select other copy modes as required.
5 Press the [START] button.