Toshiba E-STUDIO 850 - Manual (Page 160)

158
5.USING THE EDITING FUNCTIONS
17.TAB PAPER (Cont.)
5
Setting tab paper in the drawer
The setting order is different between when the tab paper is set in the drawer and when it is set on the
bypass tray.
1 Pull out the drawer.
• Placing paper in the second drawer is recommended.
3 Align the tab paper with the original.
5 Close the drawer.
• Check if the drawer for special uses is “TAB PAPER”.
2 Insert the tab paper back guide into the
slit of LT-TAB (or A4-TAB).
4 Place the tab paper with its face down in
the drawer.
front
side
Originals Sheets of tab paper
1st 2nd 3rd 4th
4th 3rd
2nd
1st
1st
2nd
3rd
4th
back side