Toshiba E-STUDIO 850 - Manual (Page 47)

45
1 Clearing the drawer for special uses
1 Follow steps 1 to 4 of “Setting the drawer for special uses” ( P.43).
2 Press the drawer on the touch panel corresponding to the one whose
setting you want to clear, and then press the button indicating the
paper type in this drawer.
• The paper type setting is cleared and the indication of drawer returns to the original state.
When both [INSERT SOURCE 1] and [INSERT SOURCE 2] have been set and only the setting of [INSERT
SOURCE 1] is cleared, the drawer for [INSERT SOURCE 2] changes to the one for [INSERT SOURCE 1].
Setting paper in the External Large Capacity Feeder (optional)
1 Pull out the External Large Capacity
Feeder carefully until it comes to a stop.
A: Slide rail
B: Elevator tray
• Be careful not to touch the slide rail.
A
A
B