Toshiba E-STUDIO 850 - Manual (Page 66)

64
2.HOW TO MAKE COPIES
6.Bypass Copying (Cont.)
2
Bypass copying on standard size paper
Making bypass copies on LD, LT, LG and ST-R
2 Place the original(s).
3 Press the button of the same size as the one of the paper you have set
on the tray.
• If the paper size is not specified here, some operations such as cleaning may slow down the copying.
1 Place some sheets of paper with their
copy side up on the bypass tray, and
align the side guides to the paper length.
• The message “Ready for bypass feeding” appears.
• Rear side of the side guides of the bypass tray has an indicator
for paper height. The height of the sheets must not exceed this
indicator.
• When you use more than one sheet, fan the sheets well before
setting them on the tray.
• Do not push the sheets into the entrance of the bypass feeder;
this may cause a paper jam.
When the paper size is larger, draw out the three-stage paper
holder.