Toshiba E-STUDIO 850 - Manual (Page 63)

61
2
4. Interrupt Copying
While continuous copying is in progress, you can interrupt this job with another copy job.
The following features cannot be used together with interrupt copying:
•
Cover sheet copying
• Sheet insertion copying
• Scan to e-Filing / Save as file
To enable “Save as file”, the Scanner Kit or the Printer/Scanner Kit (both optional) is required.
2 Replace the original with a new one.
• Set other copy modes as required.
3 Press the [START] button on the control panel.
4 After you have finished the interrupt copying, press the [INTERRUPT]
button again.
• The message “READY to resume job 1” appears and the interrupted job resumes.
Interrupt copying is automatically canceled after a certain period by automatic function clearing without the need
to press the [INTERRUPT] button again. The interrupted job (= Job 1) resumes after this automatic function
clearing.
1 Press the [INTERRUPT] button on the
control panel.
• The [INTERRUPT] button blinks first, then lights after “Job inter-
rupted job 1 saved” appears.
When the [INTERRUPT] button is pressed while originals are
being scanned, the [INTERRUPT] button blinks first. Then the but-
ton lights after “Job interrupted job 1 saved” appears when the
scanning is finished.