Toshiba E-STUDIO 850 - Manual (Page 61)

59
2
3. Auto Job Start (Job Preset)
You can reserve a copy job during warming-up or continuous copying of another job by scanning the data
of the job.
Setting auto job start
1 Place the original(s).
2 Select the copy mode and set the number of copies.
Note that the job starts in the copy modes of the previous job unless you set new ones particularly for this job.
3 Press the [START] button on the control
panel.
• Up to 10 jobs can be stored in the memory. When an 11th job is
placed on the original glass or the Reversing Automatic Docu-
ment Feeder and the [START] button is pressed, “Auto Start”
appears on the touch panel.
• A maximum of 2000 LT sheets, or up until the memory becomes
full can be accepted per 1 copy job. ( P.53 “Maximum number
of sheets”)