Toshiba M30 - Manual (Page 126)

6-16
User's Manual
P
OWER
❖ ❖ ❖ ❖ ❖ Disable (button)
Click this button to invalidate the token. You cannot revalidate old tokens, but
you can use the same SD cards to create new tokens.
Supervisor password
To set a supervisor password, follow the steps below.
1. Click Start .
2. Click Run .
3. Enter the following: C:\Program Files\Toshiba\Windows
Utilities\SVPWTool\TOSPU.EXE
NOTE: If you set a supervisor password, some functions might be
restricted when a user logs on with the user password.
This utility lets you do the following:
❖ ❖ ❖ ❖ ❖ Register, delete or change the supervisor password.
❖ ❖ ❖ ❖ ❖ Create or invalidate a supervisor token
NOTE: This function in the TOSHIBA Password Utility lets you invali-
date only supervisor tokens or all tokens, including user and supervisor
tokens.
❖ ❖ ❖ ❖ ❖ Specify restrictions for general users.
Starting the computer by password
If you registered a password, there are two ways to start the computer:
❖ ❖ ❖ ❖ ❖ Insert a token before you turn on the computer. The computer will start
normally, without displaying a password prompt.
❖ ❖ ❖ ❖ ❖ Enter the password manually.
NOTE: The password is necessary only if the computer was shut down in
boot mode. It is not needed in Hibernation or Standby mode.