Toshiba M30 - Manual (Page 146)

User's Manual
8-12
O
PTIONAL
D
EVICES
7. Turn on the computer.
8. Start the HW Setup program. Refer to Chapter 7, HW Setup .
9. Select the Parallel/Printer tab from the TOSHIBA HW Setup
window.
10. Set the Parallel Port Mode and press OK .
11. Choose Reboot for the change to take effect.
12. Select the printer in Windows Add Print Wizard. To access the Add Print
Wizard utility, click Start , point to Settings , click Printers and double
click the Add Printer icon.
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of compatible
devices such as
❖ ❖ ❖ ❖ ❖ Digital video cameras
❖ ❖ ❖ ❖ ❖ Hard disk drives
❖ ❖ ❖ ❖ ❖ MO drives
❖ ❖ ❖ ❖ ❖ CD-RW drives
NOTE: i.LINK uses a four-pin connector, which does not carry
electric current. External devices will need their own power supply.
Precautions
❖ ❖ ❖ ❖ ❖ Make a backup of your data before transferring it to the computer. There is a
possibility that the original data will be damaged. There is a particular risk that
some frames will be deleted in the case of digital video transfer. TOSHIBA
assumes no liability for such loss of data.
❖ ❖ ❖ ❖ ❖ Do not transfer data in areas where static electricity is easily generated or in
areas subjected to electronic noise. Data can be destroyed.
❖ ❖ ❖ ❖ ❖ If you are transferring data through an IEEE1394 hub, do not connect or
disconnect other devices from the hub during data transfer. There is a likeli-
hood that data will be damaged. Connect all devices to the hub before you turn
on the computer’s power.
❖ ❖ ❖ ❖ ❖
You may not use any copyrighted video or music data copied from a video
camera except for your personal enjoyment.