Disconnecting lan cable, Disconnecting lan cable -29 – Toshiba M30 User Manual
Page 97
O
PERATING
B
ASICS
4-29
2.
Plug one end of the cable into the LAN jack. Press gently until you hear the
latch click into place.
Figure 4-12 Connecting the LAN cable
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.
NOTE: When the computer is exchanging data with the LAN, the
LAN
Active
indicator glows orange. When the computer is connected to a
LAN hub but is not exchanging data, the
Link
indicator glows green.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
CAUTION: Make sure the
LAN Active
indicator (orange LED) is out
before you disconnect the computer from the LAN.
1.
Pinch the lever on the connector in the computer’s LAN jack and pull out the
connector.
2.
Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
LAN