Power-up modes, Power-up modes -17 – Toshiba M30 User Manual
Page 127
P
OWER
6-17
To enter a password manually, follow these steps:
1.
Turn on the power as described in Chapter 3,
message will be displayed:
Figure 6-3 BIOS password window
2.
Follow the on-screen prompts to enter the password.
NOTE: If you enter the password incorrectly three times in a row, the
computer shuts off. In this case, you must turn the computer back on to
retry password entry.
Power-up modes
The computer has the following power-up modes:
❖
❖
❖
❖
❖
Boot: Computer shuts down without saving data. Always save your work
before you turn the computer off in boot mode.
❖
❖
❖
❖
❖
Hibernation: Data in memory is saved to the hard disk.
❖
❖
❖
❖
❖
Standby: Data is maintained in the computer’s main memory.
NOTE: Refer also to the sections
in Chapter 3, Getting Started.
Power-up modes