Toshiba M30 - Manual (Page 130)

User's Manual
7-2
HW S
ETUP
About
Click About to display the HW Setup version.
Parallel/Printer
This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to
make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional .
ECP Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to
ECP . (Default)
Standard This setting should be used with some other parallel
Bi-directional devices.
Display
This tab lets you customize your computer’s display settings for either the internal
LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected Selects an external monitor if one is connected. Other-
wise, it selects the internal LCD. (Default)
LCD + Analog RGB Selects both the internal LCD and external monitor for
simultaneous display.
Boot Priority
Boot Priority Options list
This option sets the priority for booting the computer. You can select from 24
options.
The default is:
HDD
−> −> −> −> −>
FDD
−> −> −> −> −>
CD-ROM
−> −> −> −> −>
LAN The computer looks for bootable files in
the following order: HDD, diskette drive,
CD-ROM* and LAN.
* In this computer, CD-ROM refers to any optical media drive.