Lan -22 – Toshiba M30 User Manual
Page 170
User's Manual
T
ROUBLESHOOTING
9-22
A
CONNECT
display
Check the error control setting in your
is quickly replaced by
communications application.
NO CARRIER
You can also use the AT\N command. Refer to
Appendix C,
Character display
In data transmission, make sure the parity bit
becomes garbled
and stop bit settings correspond with those
during a
of the remote computer.
communication
Check the flow control and communication
protocol.
You cannot receive
Check the rings before auto answer setting in
an incoming call
your communications application.
You can also use the ATS0 command. Refer to
Appendix D,
If problems persist, contact your dealer.
LAN
Problem
Procedure
Cannot access LAN
Check for a firm cable connection between the
LAN jack and the LAN HUB.
Wake-up on LAN
Make sure the universal AC adaptor is con-
does not work
nected. The Wake-up on LAN function consumes
power even when the system is off.
If problems persist, consult your LAN administra-
tor.