UTStarcom UM100C - Manual (Page 14)

•
To forward an inbound message, select the message and press “Forward”
button. The message will be populated in the send area below prefixed with a
“FW:.” Press the “Send” button to send the message.
•
To resend a sent message, select the message and press the “Resend”
button. The phone number and message will be populated in the send area
below. Press the “Send” button to send the message again.
Sending SMS Messages
•
While using the UM100C, to send a text message to:
— A US-based wireless number, enter: +, 1, then the wireless number.
— A wireless number outside the US, enter: +, 011, the country code, then
the wireless number.
•
To send a SMS message to one or more subscribers, enter their 10-digit
mobile numbers separated by semi-colons in the “To...” field.
(Ex: 555-555-5555; 555-555-5556).
•
With some devices that support SMS messaging contact lists, you may be
able to click on the “ ” button to open your contact list.
•
The phone number and the message fields are required.
•
The Character counter counts up from 0 to 160 and counts all of the
characters typed in the message field.
•
Click the “Send” button.
13 12