UTStarcom UM100C - Manual (Page 27)

25 24
1) Unplug or Eject Hardware with Windows 2000
•
As shown in the above figure, two “NEC PCI to USB Open Host Controller”
options will be displayed in the Hardware devices list of Win2000. However,
one of them is disabled and marked with “V”.
Select the device with no “V” mark. If you select it and click the “Stop” button,
the following window will appear:
•
Select either of the “NEC PCI to USB Open Host Controller” and click the
[OK] button.
•
The dialog box above will appear. Click the [OK] button.