USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router - Manual (Page 116)

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
configure, or delete PPPoE relays. From this menu, you can also check the status of a PPPoE
relay.
●
List PPPoE Relay. Enter 1 at the PPPoE Relay Menu. The List PPPoE Relay Menu
appears. This menu displays variables for configured PPPoE relays.
●
Configure PPPoE Relay. Enter 2 at the PPPoE Relay Menu. The Configure PPPoE
Relay Menu appears. This menu allows you to set PPPoE relay variables. To configure
PPPoE relay variables, set these options...
§ Client Interface
[eth0/eth1/ATM/usb0]
§ Vpi [0-255]
§ Server Interface
[eth0/eth1/ATM/usb0]
§ Vci [0-65,535]
After you complete your configuration, proceed to the Basic Menu and enter 8. The Save &
Reboot Menu appears. From this menu, save your changes and reboot the router.
•
Delete PPPoE Relay Interface. Enter 3 at the PPPoE Relay Menu. The Delete PPPoE
Relay Menu appears. This menu allows you to delete PPPoE Relay interfaces by providing an
interface name.
•
PPPoE Relay Status. Enter 4 at the PPPoE Relay Menu. The PPPoE Relay Status Menu
appears. This menu allows you to change PPPoE Relay Status between enabled and disabled.
Main Menu=>Advanced=>
IGMP Proxy
file:///P|/T_WRITER/Documentation/Released/900...9003%20(Guiness)%20prac%20template/tquicks.htm (34 of 42) [11/6/2002 8:58:14 AM]