Configuration examples, U.s. robotics sureconnect, Adsl ethernet/usb router user guide – USRobotics U.S. Robotics SureConnect ADSL Ethernet/USB Router User Manual
Page 196: Setting up rfc1483 bridging
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
Contents:
US Robotics
SureConnect ADSL
Ethernet/USB Router
Configuration Utility
U.S. Robotics SureConnect
™
ADSL
Ethernet/USB Router User Guide
Windows 95, 98, NT 4.0, Me, 2000, XP or later, Mac and
Linux
• CONFIGURATION EXAMPLE
Setting Up RFC1483 Bridging
Configuration Description
When you use RFC1483 bridging, Ethernet frames bridge over the ATM virtual circuit. This circuit
connects the router to the Internet Service Provider (ISP). The router operates in Bridge Mode, and
only passes Ethernet packets between the ISP and local network. The ISP may choose to statically or
dynamically assign IP addresses to local network nodes. If the ISP employs dynamic assignment, a
DHCP server in the ISP’s network assigns addresses.
Setup
1. Open the SureConnect Web User Interface (WUI). This example employs the Web User
Interface. You can set up the Network Model with any of the router's three interfaces. The other
two interfaces are the Terminal User Interface (TUI) and the Command-Line Interface (CLI). In
any case, succeeding steps are similar.
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (1 of 33) [11/6/2002 9:00:34 AM]